Solution Description
Introduction.
The die chopping and creasing machine is an equipment specifically made for die reducing the regular cardboard, corrugated board, plastic and CZPT products. It is commonly used in the printing, packing decorating and plastic industries. The device has functions these kinds of as compact composition, fantastic workmanship, huge pressure, substantial precision and simple and reliable operation etc.
Attribute:
1. Large energy owing to 1 piece casting by employing top high quality resources for the machine human body.
two. Easy working, huge force and minimal noise are naturally remarked as herringbone equipment enter and helical equipment output system is adopted.
three. One plate electromagnetic clutch is delicate and reputable.
4. Operational altitude is moderately organized, moveable platen opens to its ideal.
five. The electrical technique is developed with IEC regular.
6. With features as single, constant operation and opening well, and the dwell time is adjustable.
seven. The securely technique is reputable.
8. With concentrated lubricating system.
Main Specifications.
| ModeI | Inner CZPT measurement | Speed | Max.pule duration | Motor Electricity | Fat | All round Proportions |
| ML-750 | 750x520mm | 25±2(sprokes/min) | <14m | 2.2kw | 1800kg | 1360x1400x1300mm |
| ML-930 | 930x670mm | 23±2(sprokes/min) | <25m | 4kw | 3000kg | 1680x1680x1640mm |
| ML-1040 | 1040x720mm | 23±2(sprokes/min) | <30m | 4kw | 4000kg | 1850x1780x1700mm |
| ML-1100 | 1100x800mm | 20±2(sprokes/min) | <26.5m | 4kw | 4500kg | 1900x1780x1700mm |
| ML-1200 | 1200X820mm | 20±2(sprokes/min) | <26.5m | 4kw | 4500kg | 1900x1900x1750mm |
| ML-1300 | 1300x920mm | 18±2(sprokes/min) | <38m | 5.5kw | 5600kg | 1920x2140x1800mm |
| ML-1400 | 1400x1000mm | 17±2(sprokes/min) | <38m | five.5kw | 6200kg | 2571x2400x1930mm |
| ML-1500 | 1500x1050mm | 17±2(sprokes/min) | <40m | seven.5kw | 6800kg | 25710x2480x1960mm |
| ML-1600 | 1600x1250mm | 13±2sprokes/min | <50m | 11kw | 11000kg | 2500×2200×2000mm |
| ML-1800 | 1800×1250mm | 13±2sprokes/min | <60m | 11.5kw | 13500kg | 2510×2300×2000m |
| ML2000 | 2000×1400mm | 13±2strokes/min | <60m | 15kw | 16000kg | 2270×3100×2150mm |
| ML2500 | 2500×1500mm | 13±2strokes/min | <75m | eighteen.5kw | 20000kg | 2300×3600×2150mm |
Qianding Devices Loaded Into Container At the HangZhou Port.
Racks are utilised to convert rotary movement into linear movement. The spur tooth of the rack lower into a single confront of the square or circular rod area and work with the pinion, which is a little cylindrical gear that meshes with the rack. Normally, racks and pinions are collectively referred to as “rack and pinion”.
Gears are utilized in a massive number of mechanical units. Most importantly, they supply gear reduction for motorized tools. This is important because usually modest motors that spin very quickly can provide adequate power to the system, but not ample torque, the pressure that brings about an item to spin or twist on an axis. For example, an electric screwdriver has a very large gear reduction (lowers the pace of a rotating equipment (like an electric powered motor)) because it requires a good deal of torque to turn the screw. But the motor generates only a small quantity of torque at high speeds. With equipment reduction, the output pace can be lowered although rising the torque.
