China Custom Close Type Two Points Eccentric Mechanical Power Press with Good quality

Solution Description

shut kind 2 factors eccentric mechanical power push

JS36 straight side 2 points press is designed for the application of higher precision, weighty steel stampings functions, this sort of as bike and bicycle elements, and residence appliance elements. Automation provisions, JX36 can be very easily upgraded for progressive robotic or mechanical transfer method.

Attributes:

one) Welded Metal plate framework with CZPT beam, column and the foundation tightened and mixed into 1 entire body by taut bolts.

two) Herringbone gear transmission.

3) Slide guiding adopts eight-aspect orthogonal guide rail or forty five degree inclined 4-facet guide rail.

4) Pneumatic friction clutch and brake.

five) Equipped with hydraulic overload protecting system.

6) Computerized oil lubrication technique with normal time and potential.

7) Duplex valves imported. Controlled by PLC with international brand name.

eight) Buttons, indicators, AC contactors, air circuit breakers and other controlling units are imported from worldwide brand

9) Double loop management by imported digital and mechanical cam controller.

10) Optional: air cushion, entrance-back again relocating bolster, hydraulic cushion, reduced speed shut top adjustment and transmission method, gentle curtain.

Particulars:

Parameters:

Parameter Unit JS36- 250 JS36- three hundred JS36- four hundred
Nominal Potential KN 2500 3000 4000
Nominal strain stroke mm thirteen 13 13
Slide Stroke mm four hundred 400 four hundred
Strokes For each Moment spm sixteen sixteen 16
Max Die Established Peak mm 650 720 770
Die Top Adjustment mm 315 400 400
Bolster Size L×R mm 2600 2800 2800
  F×B mm 1300 1600 1600
Slide Bottom Measurement L×R mm 2600 2800 2800
  F×B mm 1300 1600 1600
Side Knockout Rod Structure   rigidity rigidity rigidity
  Knockout pressure KN a hundred a hundred and fifty one hundred fifty
Cushion Clamping stress KN 510 600 600
  Withdraw force KN 510 600 600
  Amount Computer one one one
  Stroke mm 200 two hundred two hundred
All round Proportions Height mm 6960 7000 7000
  L×R mm 4760 5100 5100
  F×B mm 4200 4000 4000
Motor Energy KW 37 37 forty five
Weight T seventy five 90 104
Parameter Device JS36- 500 JS36- 630 JS36- 800
Nominal Ability KN 5000 6300 8000
Nominal pressure stroke mm thirteen 13 thirteen
Slide Stroke mm 400 five hundred five hundred
Strokes For each Minute spm sixteen fourteen ten
Max Die Established Peak mm 650 1100 990
Die Height Adjustment mm four hundred five hundred four hundred
Bolster Size L×R mm 2800 3500 3640
  F×B mm 1600 1800 1800
Slide Base Dimensions L×R mm 2800 3500 3640
  F×B mm 1600 1800 1800
Facet Knockout Rod Construction   rigidity rigidity rigidity
  Knockout strain KN 150 one hundred fifty a hundred and fifty
Cushion Clamping stress KN 600 1000 a thousand
  Withdraw stress KN 600 1000 a thousand
  Amount Personal computer 1 one 1
  Stroke mm two hundred 250 250
Overall Proportions Peak mm 7400 8000 8500
  L×R mm 5100 6200 6800
  F×B mm 4000 4370 4600
Motor Electrical power KW 75 ninety a hundred and ten
Weight T 142 180 210
Parameter Unit JS36-1000 JS36-1250 JS36-1600
Nominal Capacity KN ten thousand 12500 16000
Nominal stress stroke mm thirteen 13 13
Slide Stroke mm 500 600 500
Strokes Per Moment spm 10 twelve ten
Max Die Set Top mm 1000 1300 950
Die Height Adjustment mm 400 five hundred four hundred
Bolster Measurement L×R mm 4000 4000 5000
  F×B mm 2000 2000 2000
Slide Bottom Size L×R mm 4000 4000 5000
  F×B mm 2000 2000 2000
Side Knockout Rod Framework   rigidity rigidity air
  Knockout strain KN a hundred and fifty one hundred fifty 100
Cushion Clamping stress KN 1200 1500 1500
  Withdraw pressure KN 1200 1500 1500
  Amount Pc 1 one one
  Stroke mm 250 250 250
Overall Dimensions Height mm 9000 9900 ten thousand
  L×R mm 7500 8500 8500
  F×B mm 5300 5600 5600
Motor Electricity KW one hundred ten 132 132
Weight T 255 320 480

 

 

The purpose guiding the rack is to convert rotational motion into linear movement, the rack operates via a pinion (a cylindrical gear that meshes with the rack), so this set up is frequently referred to as a rack and pinion. When operating gears and racks, equipment oil is also very suggested to increase performance and longevity. We also inventory a vast selection of metric spur gears and supply almost every single electrical power transmission product on the marketplace
Racks, when utilised with spur gears, change rotational movement to linear movement. EP Gear’s racks are created to work with our stock fourteen 1/2° and 20° PA spur gears. Typically, racks are modified to match certain purposes. This may incorporate drilling and tapping mounting holes, chopping to a distinct length, or matching the finishes of two racks to generate a more time ongoing size than stock.

China Custom Close Type Two Points Eccentric Mechanical Power Press     with Good quality